MEASTEK HCTL0600A High frequency Flexible Current Probe - 10KV Withstand Voltage And High Current Measurement For Capacitor
1.With 10MHz high-frequency bandwidth, it can accurately detect high-frequency sinusoidal current waveforms. High-frequency current detection probes are often used for current measurement in RF circuits.
2.10mV/A sensitivity and 1% typical accuracy can accurately measure small currents, and perform well in the scenario of small current monitoring of electronic equipment.
3.10KV insulation withstand voltage, suitable for high-current and high-voltage occasions such as high-voltage capacitor discharge test and ripple measurement, which meets the needs of high-voltage capacitor test equipment.
4.The outer diameter of the probe ring is 8mm, which is soft and easy to operate. In the distributed current monitoring scenario, it can be flexibly arranged in a complex circuit environment.
5.USB power supply interface design, flexible and convenient to use, standard BNC output interface is easy to connect to oscilloscopes, data acquisition devices and other equipment to achieve real-time observation of current waveforms.
Specifications
| Model | HCTL0600A |
| Sensitivity (mV/A) | 10 |
| Peak | Current (KA) | 0.6 |
| dI/dt(KA/μs) | 4.0 |
| Maximum noise (mV Vpp) | 8 |
| Attenuation characteristics(%/ms) | 3 |
| Low frequency bandwidth -3dB(Hz) | 3.5 |
| High frequency bandwidth -3dB(MHz) | 10 |
| Typical accuracy | 1% |
| Insulation voltage value | 10KV |
HCT(S)XXXXA Series Other Technical Parameters
| Maximum output voltage | 6Vpk |
| Terminal load | ≥100kΩ |
| Power supply mode | USB 5V (standard adapter) |
| Operating temperature range | Integrator | 0℃ - 50℃ |
| Probe ring | 0℃ - 100℃ |
| Storage temperature range | -40℃～80℃ |
Product Description
(Take HCTS0120A as an example)
1) Input interface: current probe test signal input terminal.
2) Output interface: current probe integrator signal output terminal.
3) USB 5V power supply interface: standard USB (type B) interface. (USB power supply cable and power adapter are standard)
4) Test connection diagram.
Mechanical specifications
| Model | HCTSXXXXA |
| Typical value of flexible probe circumference (customizable) | 80mm |
| Typical value of induction ring body diameter | 1.6mm |
| Typical value of flexible probe diameter (customizable) | 25mm |
| Induction loop connection cable length | 1 M (customizable) |
| BNC connection cable length | 1 M or 2 M, 1 M is Standard |
| Integrator body dimensions (including BN port dimensions) | About 110(L)*47(W)*30(H)mm |
| USB cable (AM-BM) | About 1.8m |
| USB output adapter | About 59mm*30mm*20mm |
| Probe weight | About 150g |
| Box weight (including probe) | About 960g |
Care And Maintenance
1) Keep the probe clean and dry.
2) If cleaning is required, wipe with a soft dry cloth. Do not use chemical cleaning agents.
3) When the probe is not in use, please put it in the packaging provided and place it in a cool, clean and dry place.
4) When transporting the probe, be sure to put it in the packaging provided by our company to prevent shock.
5) Do not pull the input and output lines hard to avoid excessive twisting, bending or knotting.
Packing List
| Name | Quantity |
| Current probe integrator | 1 piece |
| Current probe flexible induction coil | 1 piece |
| USB output adapter (5V/1A) | 1 piece |
| USB power cable | 1 piece |
| BNC output cable | 1 piece |
| Electronic manual | 1 serving |
Product Tags:
|
|
MEASTEK HCTL0600A High frequency Flexible Current Probe - 10KV Withstand Voltage And High Current Measurement For Capacitor Images
|
